Jeep 2006 Commander User Manual download pdf (Page 126)

100

101

Fog Lights — If Equipped

The fog light switch is located in the multi-

function control lever. To activate the fog lights,

turn on the park/turn lights, low beam headlights,

or “Auto” headlights and pull out the end of the multi-

function control lever. A light in the instrument cluster

shows when the fog lights are on.

NOTE: Turning on the high beam headlights turns off

the fog lights.

A front fog light is a lighting device providing illumina-

tion forward of the vehicle under conditions of fog, rain,

snow, or dust. Principally, the front fog light supplements

the lower beam of a standard headlight system.

NOTE: Proper aim and adjustments of the front fog

lights should be made to prevent excessive glare for other

drivers.

Turn Signals

Move the multi-function control lever up or down and

the arrows on each side of the instrument cluster will

flash to show proper operation of the front and rear turn

signal lights. You can signal a lane change by moving the

lever partially up or down.

High Beam Switch

Pull the multi-function control lever towards you to

switch the headlights to “High” beam. The “High Beam

Indicator Light” on the instrument cluster will illumi-

nate. Pull the multi-function control lever a second time

to switch the headlights to “Low” beam.

Passing Light

You can signal another vehicle with your headlights by

lightly pulling the multi-function control lever toward

the steering wheel. This will cause the headlights to turn

on at high beam and remain on until the lever is released.

126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 439 440

Comments to this Manuals

No comments

Jeep 2006 Commander User Manual Page 126

Comments to this Manuals

Related products and manuals for Cars Jeep 2006 Commander