Jeep 2006 Commander User Manual download pdf (Page 116)

100

101

5. Turn on the radio and set the radio station presets (up

to 10 AM and 10 FM stations can be set).

6. Turn the ignition switch to the OFF position and

remove the key.

7. Press and release the SET (S) button located on the

driver’s door.

8. Within 5 seconds, press and release memory button 1

or 2 on the driver’s door. The next step must be per-

formed within 5 seconds if you desire to also use a

Remote Keyless Entry transmitter to recall memory po-

sitions.

9. Press and release the “Lock” button on one of the

transmitters.

10. Insert the ignition key and turn the ignition switch to

the ON position.

11. Select ⬙Remote Linked to Memory⬙ in the Electronic

Vehicle Information Center (EVIC) and enter ⬙Yes⬙ or

select ⬙Use Factory Settings⬙ from the EVIC and enter

⬙Yes⬙. Refer to “Electronic Vehicle Information Center

(EVIC) — Customer Programmable Features” in Section

4 for more information.

12. Repeat the above steps to set the next memory

position using the other numbered memory button or to

link another Remote Keyless Entry transmitter to

memory.

Memory Position Recall

NOTE: The vehicle must be in Park to recall memory

positions. If a recall is attempted when the vehicle is not

in Park, a message will be displayed in the Electronic

Vehicle Information Center (EVIC).

116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 439 440

Comments to this Manuals

No comments

Jeep 2006 Commander User Manual Page 116

Comments to this Manuals

Related products and manuals for Cars Jeep 2006 Commander