Jeep 2006 Commander User Manual download pdf (Page 118)

100

101

NOTE: Once programmed, all transmitters linked to

memory can be easily enabled or disabled at one time.

Refer to Remote Linked to Memory under ⬙Electronic

Vehicle Information Center (EVIC) — Customer Pro-

grammable Features⬙ in Section 4 for more information.

Easy Entry/Exit Seat

This feature provides automatic driver’s seat positioning

which will enhance driver mobility out of and into the

vehicle.

There are two possible Easy Exit and Easy Entry adjust-

ments available:

•

The seat cushion will move rearward approximately

2.5 inches (60 mm) if the starting position of the seat is

greater than or equal to 3.75 inches (90 mm) forward of

the rear seat stop when the key is removed from the

ignition switch. The seat will then move forward

approximately 2.5 inches (60 mm) when the key is

placed into the ignition and turned out of the LOCK

position.

•

The seat shall move to the position located 1 1/8

inches (30 mm) forward of the rear stop if the starting

position is between 2.5 inches to 3.75 inches (60 mm to

90 mm) forward of the rear stop when the key is

removed from the ignition switch. The seat will move

forward to the memory/driving position when the

key is placed into the ignition, and turned out of the

LOCK position toward the RUN position.

The Easy Entry/Easy Exit feature will be automatically

disabled if the seat is already positioned closer than 2.5

inches (60 mm) forward of the rear stop. At this position

there is no benefit to the driver by moving the seat for

Easy Exit or Easy Entry.

Each stored memory setting will have an associated Easy

Entry and Easy Exit position.

118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 439 440

Comments to this Manuals

No comments

Jeep 2006 Commander User Manual Page 118

Comments to this Manuals

Related products and manuals for Cars Jeep 2006 Commander