Jeep 2006 Commander User Manual download pdf (Page 179)

100

101

engine start. If the bulb does not come on when turning

the key from OFF to ON, have the condition checked

promptly.

Certain conditions such as a loose or missing gas cap,

poor fuel quality, etc. may illuminate the light after

engine start. The vehicle should be serviced if the light

stays on through several of your typical driving cycles. In

most situations the vehicle will drive normally and will

not require towing.

The Malfunction Indicator Light flashes to alert you to

serious conditions that could lead to immediate loss of

power or severe catalytic converter damage. The vehicle

should be serviced as soon as possible if this occurs. (See

page 348 for more information.)

6. Airbag Warning Light

This light turns on and remains on for 6 to 8

seconds as a bulb check when the ignition

switch is first turned ON. If the light is not on

during starting, stays on, or turns on while

driving, have the system inspected by an authorized

dealer as soon as possible.

7. Anti-Lock Brake Warning Light

This light monitors the Anti-Lock Brake System.

The light will turn on when the ignition switch is

turned to the ON position and may stay on for as long as

four seconds.

If the ABS light remains on or turns on while driving, it

indicates that the Anti-Lock portion of the brake system

is not functioning and that service is required. However,

the conventional brake system will continue to operate

normally if the BRAKE warning light is not on.

UNDERSTANDING YOUR INSTRUMENT PANEL 179

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 439 440

Comments to this Manuals

No comments

Jeep 2006 Commander User Manual Page 179

Comments to this Manuals

Related products and manuals for Cars Jeep 2006 Commander