Jeep 2011 Liberty User Manual download pdf (Page 155)

100

101

3. Press and release the SET button on the memory

switch, then press the side of the rocker switch labeled (2)

within five seconds. The EVIC, if equipped, will display

which memory position is being set.

NOTE:

•

For vehicles equipped with an automatic transmission,

memory profiles can be set without the vehicle in

PARK, but the vehicle must be in PARK to recall a

memory profile.

•

For vehicles equipped with a manual transmission, the

vehicle speed must be at 0 mph (0 km/h) to recall a

memory profile.

•

The Recall Memory with Remote Key Unlock feature

can be turned on and off through the EVIC, if

equipped. Refer to “Electronic Vehicle Information

Center (EVIC)/Customer-Programmable Features” in

“Understanding Your Instrument Panel” for further

information.

Linking And Unlinking The Remote Keyless Entry

Transmitter To Memory

Your Remote Keyless Entry (RKE) transmitters can be

programmed to recall one of two pre-programmed

memory profiles with a press of the UNLOCK button on

the RKE transmitter.

To program your RKE transmitters, perform the follow-

ing:

1. Remove the key from the ignition.

2. Select the desired memory profile 1 or 2.

3. Press and release the SET button on the memory

switch, then within five seconds press and release the

side of the rocker switch labeled 1 or 2 accordingly.

⬙Memory Profile Set” (1 or 2) will display in the EVIC, if

equipped.

4. Press and release the LOCK button on the RKE

transmitter within 10 seconds.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 541 542

Comments to this Manuals

No comments

Jeep 2011 Liberty User Manual Page 155

Comments to this Manuals

Related products and manuals for Cars Jeep 2011 Liberty