Jeep 2010 Wrangler Unlimited - Owner Manual User Manual Page 501

  • Download
  • Add to my manuals
  • Print
  • Page
    / 554
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 500
Rear Tail, Stop, Turn Signal, and Backup Lamp
1. Remove the two inboard screws attaching the tail light
housing to the body. DO NOT REMOVE THE OUTER
SCREWS AT ANY TIME.
2. Separate the housing from the body by pushing the
lamp inboard while pulling the lamp away from the
body.
3. Rotate the appropriate socket 1/4 turn counterclock-
wise, then remove it from the housing.
4. Pull the bulb straight from the socket to replace.
Center High-Mounted Stop Lamp (CHMSL)
The stop lamp is mounted on a bracket that extends
upward from the tailgate behind the spare tire. If service
is needed, obtain the LED/Cover Assembly from your
local authorized dealer.
1. Remove the spare tire.
2. Remove the four screws holding the lens/cover in
place on the spare tire carrier.
3. Disconnect the wire harness from the back of the LED
cover.
500 MAINTAINING YOUR VEHICLE
Page view 500
1 2 ... 496 497 498 499 500 501 502 503 504 505 506 ... 553 554

Comments to this Manuals

No comments