Jeep 2010 Wrangler Unlimited - Owner Manual User Manual download pdf (Page 349)

100

101

4H Position

This range locks the front and rear driveshafts together,

forcing the front and rear wheels to rotate at the same

speed. This range (4H) provides additional traction for

loose, slippery road surfaces and should not be used on

wet or dry pavement.

The “4WD Indicator Light” (located in the instrument

cluster) will illuminate when the transfer case is shifted

into the 4H position.

N (Neutral) Position

This range disengages the front and rear driveshafts from

the powertrain. It is to be used for flat towing behind

another vehicle. Refer to “Recreational Towing” in “Start-

ing and Operating” for further information.

4L Position

This range locks the front and rear driveshafts together,

forcing the front and rear wheels to rotate at the same

speed. This range (4L) provides additional traction and

maximum pulling power for loose, slippery road surfaces

only. Do not exceed 25 mph (40 km/h).

The “4WD Indicator Light” (located in the instrument

cluster) will illuminate when the transfer case is shifted

into the 4L position.

Shifting Procedure

2H to 4H or 4H to 2H

Shifting between 2H and 4H can be made with the

vehicle stopped or in motion. If the vehicle is in motion,

shifts can be made up to 50 mph (80 km/h). With the

vehicle in motion, the transfer case will engage/

disengage faster if you momentarily release the accelera-

tor pedal after completing the shift. Apply a constant

force when shifting the transfer case lever.

348 STARTING AND OPERATING

1 2 ... 344 345 346 347 348 349 350 351 352 353 354 ... 553 554

Comments to this Manuals

No comments

Jeep 2010 Wrangler Unlimited - Owner Manual User Manual Page 349

Comments to this Manuals

Related products and manuals for Cars Jeep 2010 Wrangler Unlimited - Owner Manual