Jeep 2004 Grand Cherokee User Manual download pdf (Page 193)

speed. Additional traction and maximum pulling power

for loose, slippery road surfaces only. Do not exceed 25

mph (40 km/h).

Shifting Procedure

4 ALL TIME to 4 LO or 4 LO to 4 ALL TIME

With the vehicle rolling at 2 to 3 mph (3 to 5 km/h), shift

the transmission into N (Neutral). While the vehicle is

coasting at 2 to 3 mph (3 to 5 km/h), shift the transfer

case lever firmly into the desired position. Do not pause

in transfer case N (Neutral).

NOTE: Pausing in transfer case N (Neutral) in vehicles

equipped with an automatic transmission may require

shutting the engine OFF to avoid gear clash while

completing the shift. If difficulty occurs, shift the trans-

mission intoN (Neutral),hold foot on brake, and turn the

engine OFF. Make shift to desired mode.

NOTE: Shifting into or out of 4LO is possible with the

vehicle completely stopped, however difficulty may oc-

cur due to the mating clutch teeth not being properly

aligned. Several attempts may be required for clutch

teeth alignment and shift completion to occur. The pre-

ferred method is with the vehicle rolling 2 to 3 mph (3 to

5 km/h). Avoid attempting to engage or disengage 4LO

with the vehicle moving faster than 2 to 3 mph (3 to 5

km/h).

STARTING AND OPERATING 193

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 343 344

No comments

Jeep 2004 Grand Cherokee User Manual Page 193